Product Manual


©Adam Equipment Co. 2019 17
Fastest
Then: 1-6
Rs 1
Brings up the 1
st
RS232 menu.
Includes PC, command and
print settings
PC
Cmd
Print
Rs 2
Brings up RS232 menu 2 PC
Cmd
S-id
Set Scale ID To be entered manually 000000
U-id
Set User ID To be entered manually 000000
rechar
Indicates time to recharge - -
7.2 RS-232 PARAMETERS
This group of parameters can be set by the user for setting the RS-232 active or not, baud
rate, printing mode, accumulation mode, RS-232 language, and user or scale ID numbers.
 Pressing the [Func/Set] key and holding for 2 seconds during normal
operation allows the user to access the parameters.
 Scroll through the list of functions using the ⭡ and ⭣ directional keys. Press
[Tare/↵] to enter the ‘rs 1’ or ‘rs 2’ parameters when appearing on the
display.
 ‘Rs 1’ will provide access to ‘Print’, ‘PC’ and ‘Cmd’ settings. ‘Rs 2’ includes
‘PC’ and ‘Cmd’ only. Press [Tare/↵] to confirm.
 When entering a mode, the user will be required to go through each step of
the process by entering the desired values or selecting from the options listed
in the table below and pressing the [Tare/↵] key to confirm.
 Press [0/Esc] to exit the scale parameter section and return to normal
weighing.
7.2.1 Print settings
Parameter Description Options Default Values or
setting
[baud rate]
Baud Rate 1200
2400
4800
9600
19200
38400
57600
115200
9600
[Language] Select Language EnGLis (English)
FrEnCH (French)
GErmAn (German)
SPAn (Spanish)
Portug (Portuguese)
Itail (Italian)
EnGLis
[Accumulation] Enable or disable the
Accumulation
on
oFF
off
[Printing Printing Mode- Manual or mAn, mAn