Product Manual


©Adam Equipment Co. 2019 12
 Remove the sample weight. Then any other weight placed on the scale will
be displayed as a percentage of the original sample. For example, if 3500g
is placed on the scale and percent weighing is selected, the display will show
100.0%. Remove the 3500g weight and place a 3000g weight. The display
will show 85.7% as 3000g is 85.7% of 3500g.
 The number of decimal points will depend on the weight used in comparison
to the capacity of the system. A smaller weight will show only “100%” while a
larger weight might show “100.00%”.
 If the scale was showing zero weight when entering this function, then the
user must manually enter the weight to be set as 100% as described below.
 Make reference weight of 100% on platform.
 Press the [Disp/Mode] key. Display will show 100%.
 The weight entered must be greater than 50 scale divisions.
 Press the [Func/Set] key to select a new weighing mode.
NOTE:
The display may jump by large numbers unexpectedly if small weights are used to set as
100% reference. The scale checks if the weight is too small and will show Error 7.
6.10 ANIMAL (DYNAMIC) WEIGHING
The scale can be set to animal (dynamic) weighing for weighing any items that are
unstable or may move.
The scale will use a special filter to minimise the effects of any movement while the
moving animal or unstable samples are on the scale.
 Press [Func/Set] and scroll through the list of functions using the ⭡ and ⭣
directional keys
 Press [Tare/↵] to enter animal weighing. The display will show “LOAD” and the
Animal/Dynamic weighing symbol The scale is now ready to weigh an
unstable animal or sample on a weighing scale platform.