Manual

3
Setting up your speakers
General recommendations for the set up:
• The speakers should be positioned on rm ground or a stand. Vibrating parts
of nearby objects can mask the sound.
• Normally it is advised to set them up in the horizontal position:
A and B speakers
• there are 2 kinds of HM3´s. To avoid interferences between the woofers of the
HM3 one of the units stops at 150 Hz, like a built in subwoofer, the other one
goes up to 1800 Hz. You nd an A or B label on the back side of the monitors.
The A means that the subwoofer is on the left side if you look at the unit from
a listening positon, the B speaker has it on the right side. You can use A as the
left speaker, then you have a subjectively smaller basis. If you use it as the
right speaker the basis will be somewhat broader. There is no rule or xed
proposal when or where the speakers sound better, please try it out for
yourself.
But:
• Don´t use 2 A-speakers or 2 B-speakers in a stereo set up, the imaging will
suffer!
• If the speakers are in a vertical position - as indicated below - please position
both panels readable. You will get the most linear frequency response on different
listening positions that way.
so:
NOT SO:
A
B
A
B
A
B
).
).
).
).
).
).
).
).