Datasheet

Solder the header:
Cut the header to size (9 pins)
and insert it into a breadboard
(long pins down!) to hold it
steady.
For breadboard use:
Place the amplifier module face-
up over the headers. Prop the
back-edge up with the leftover
header strip to align it.
For use with
connectors:
If you are going to build this into
a project and want to connect
from the front side, place the
amplifier module face down for
soldering.
© Adafruit Industries https://learn.adafruit.com/stereo-3-7w-class-d-audio-amplifier Page 7 of 18