Datasheet

CP2102/9
Rev. 1.8 7
Table 3. Recommended Operating Conditions
V
DD
= 3.0 to 3.6 V, –40 to +85 °C unless otherwise specified
Parameter Symbol Test Condition Min Typ Max Unit
Supply Voltage
V
DD
3.0 3.3 3.6 V
Supply Current - USB Pull-up
1
I
PU
—200230µA
Specified Operating Temperature
Range
T
A
–40 — +85 °C
Thermal Resistance
2
θ
JA
—32—°C/W
CP2102
Supply Current—Normal
3
I
REGIN
Normal Operation;
V
REG
Enabled
—2026mA
Supply Current—Suspended
3
Bus Powered;
V
REG
Enabled
—80100µA
CP2109
Supply Current—Normal
3
I
REGIN
Normal Operation;
V
REG
Enabled
—1723mA
Supply Current—Suspended
3
Bus Powered;
V
REG
Enabled
—90230µA
Notes:
1. The USB Pull-up supply current values are calculated values based on USB specifications. USB Pull-up supply current
is current flowing from V
DD
to GND through USB pull-down/pull-up resistors on D+ and D-.
2. Thermal resistance assumes a multi-layer PCB with any exposed pad soldered to a PCB pad.
3. USB Pull-up current should be added for total supply current. Normal and suspended supply current is current flowing
into V
REGIN
. Normal and suspended supply current is guaranteed by characterization.