Datasheet

effect when moving the sensor around - the effect isn't noticeable when things move slowly.

To make it easy to use, we hand-soldered it on a breakout board with a 3.3V regulator and level shifting. So you can

use it with any 3V or 5V microcontroller or computer. We've even included SparkFun

qwiic (https://adafru.it/Fpw) compatible STEMMA QT (https://adafru.it/Ft4) connectors for the I2C bus so you don't

even need to solder! Just plug-n-play with any of our STEMMA QT (JST SH) cables.

Even better - We've done all the hard work here, with example code and supporting software libraries to get you up in

running in just a few lines of Arduino (https://adafru.it/IDj) or Python code (https://adafru.it/IBv).