Datasheet

downloading a PNG of blinka that has been adjusted down to 3 colors so it prints nicely on an ePaper Display. We are

using PNG for this because it is a lossless format and won't introduce unexpected colors in.

Make sure you save it as blinka.png and place it in the same folder as your script. Here's the code we'll be loading

onto the Raspberry Pi. Go ahead and copy it onto your Raspberry Pi and save it as epd_pillow_image.py. We'll go over

the interesting parts.

"""

Image resizing and drawing using the Pillow Library. For the image, check out the

associated Adafruit Learn guide at:

https://learn.adafruit.com/adafruit-eink-display-breakouts/python-code

Written by Melissa LeBlanc-Williams for Adafruit Industries

"""

import digitalio

import busio

import board

from PIL import Image

from adafruit_epd.il0373 import Adafruit_IL0373

from adafruit_epd.il91874 import Adafruit_IL91874 # pylint: disable=unused-import

from adafruit_epd.il0398 import Adafruit_IL0398 # pylint: disable=unused-import

from adafruit_epd.ssd1608 import Adafruit_SSD1608 # pylint: disable=unused-import

from adafruit_epd.ssd1675 import Adafruit_SSD1675 # pylint: disable=unused-import

# create the spi device and pins we will need

spi = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)

ecs = digitalio.DigitalInOut(board.CE0)

dc = digitalio.DigitalInOut(board.D22)

srcs = None

rst = digitalio.DigitalInOut(board.D27)

busy = digitalio.DigitalInOut(board.D17)

# give them all to our driver

#display = Adafruit_SSD1608(200, 200, spi, # 1.54" HD mono display

#display = Adafruit_SSD1675(122, 250, spi, # 2.13" HD mono display

#display = Adafruit_IL91874(176, 264, spi, # 2.7" Tri-color display

#display = Adafruit_IL0373(152, 152, spi, # 1.54" Tri-color display

#display = Adafruit_IL0373(128, 296, spi, # 2.9" Tri-color display

#display = Adafruit_IL0398(400, 300, spi, # 4.2" Tri-color display

display = Adafruit_IL0373(104, 212, spi, # 2.13" Tri-color display