Datasheet

https://adafru.it/EaE

Rename the file blinka.bmp and place into the base directory of a microSD card and insert it into the microSD socket

in the breakout.

One extra wire is required, for SDCS which is the SD card Chip Select. We'll connect that to pin #4 but you can use any

pin.

Plug the MicroSD card into the display. You may want to try the SD library examples before continuing, especially one

that lists all the files on the SD card

Open the file->examples->Adafruit_ImageReader->EInkBreakouts example

Upload to the upload & you will see Blinka appear!