User Manual

#include <Adafruit_LPS35HW.h>

Adafruit_LPS35HW lps35hw = Adafruit_LPS35HW();

// For SPI mode, we need a CS pin

#define LPS_CS 10

// For software-SPI mode we need SCK/MOSI/MISO pins

#define LPS_SCK 13

#define LPS_MISO 12

#define LPS_MOSI 11

void setup() {

Serial.begin(115200);

// Wait until serial port is opened

while (!Serial) { delay(1); }

Serial.println("Adafruit LPS35HW Test");

if (!lps35hw.begin_I2C()) {

//if (!lps35hw.begin_SPI(LPS_CS)) {

//if (!lps35hw.begin_SPI(LPS_CS, LPS_SCK, LPS_MISO, LPS_MOSI)) {

Serial.println("Couldn't find LPS35HW chip");

while (1);

}

Serial.println("Found LPS35HW chip");

}

void loop() {

Serial.print("Temperature: ");

Serial.print(lps35hw.readTemperature());

Serial.println(" C");

Serial.print("Pressure: ");

Serial.print(lps35hw.readPressure());

Serial.println(" hPa");

Serial.println();

delay(1000);

}