User Manual

(https://adafru.it/EVv)

If you don't see this, you may have the wrong WiFiNINA library installed. Uninstall it and re-install the Adafruit one as

above.

Compile and upload to your board wired up to the AirLift

(https://adafru.it/EVw)

If you don't even get the MAC address printed out, check your wiring.

If you get the MAC address but cannot scan any networks, check your power supply. You need a solid 3-5VDC

into Vin in order for the ESP32 not to brown out.

WiFi Connection Test

Now that you have your wiring checked, time to connect to the Internet!

Open up the WiFiWebClient example

https://learn.adafruit.com/adafruit-airlift-featherwing-esp32-wifi-co-

processor-featherwing

Page 31 of 39