User Manual

Overview

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit

MCP9600 does all that for you, and can be easily interfaced with any microcontroller or single-board-computer with

I2C. Inside, the chip handles all the analog stuff for you, and can interface with just about any thermocouple type: K, J,

T, N, S, E, B and R type are all supported! You can also set various alerts for over/under temperature, and read the

thermocouple (hot) temperature and the chip (cold) temperature. All this over common I2C.

This breakout board has the chip itself, a 3.3V regulator and level shifting circuitry, all assembled and tested. Works

great with 3.3V

5V logic. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to

plug into any breadboard or perfboard).