Datasheet

NTAG203 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet
COMPANY PROPRIETARY
Rev. 3.0 — 17 October 2011
213830 16 of 30
NXP Semiconductors
NTAG203
NFC Forum Type 2 Tag compliant IC with 144 bytes user memory
8.8 Command set
The ATQA and SAK are identical as for MIFARE Ultralight (see Ref. 7 “MF0ICU1
Functional specification MIFARE Ultralight”). For information on ISO 14443 card
activation, see Ref. 3 “
ISO/IEC 14443 PICC Selection”. Summary of data relevant for
device identification is given in Section 8.9 “
Summary of relevant data for device
identification”.
The NTAG203 comprises the command set as described in following chapters.
8.8.1 REQA
Description: The NTAG203 accepts the REQA command in Idle state only. The response
is the 2-byte ATQA (0044h). REQA and ATQA are implemented fully according to
ISO/IEC 14443-3.
8.8.2 WUPA
Description: NTAG203 accepts the WUPA command in the Idle and Halt state only. The
response is the 2-byte ATQA (0044h). WUPA is implemented fully according to ISO/IEC
14443-3.
Table 9. REQA
Code Parameter Data Integrity mechanism Response
26h (7-bit) - - Parity 0044h
Remark: Time units are not to scale and rounded off to 10 s
Fig 9. REQA
aaa-001143
CMD (7 bit)
ATQA
80 ms
RWD
command
time
NTAG
response
90 ms
170 ms
26
44 00
Table 10. WUPA
Code Parameter Data Integrity mechanism Response
52h (7-bit) - - Parity 0044h
Remark: Time units are not to scale and rounded off to 10 s
Fig 10. WUPA
aaa-001144
CMD (7 bit)
ATQA
70 ms
RWD
command
time
NTAG
response
90 ms
170 ms
52
44 00