Datasheet

On the Back

JST Battery Input - you can optionally solder on a a JST PH connector on the back so you can take your Trinket

anywhere and power it from an external battery. The connector is also tied to the BAT pin on the headers but it can be

nice to just plug in a cable

This pin can take up 6V DC input, and has reverse-polarity, over-current and thermal protections. The circuitry inside

will use either the battery or USB power, safely switching from one to the other. If both are connected, it will use

whichever has the higher voltage. Works great with a Lithium Polymer battery or our 3xAAA battery packs with a JST

connector on the end. There is no built in battery charging (so that you can use Alkaline

Lithium batteries safely)

JST-PH 2-Pin SMT Right Angle Connector

$0.75

IN STOCK

ADD TO CART