User Manual

Adafruit DotStar High Density 8x8

Grid (https://adafru.it/CIB)

This is the tiniest little LED grid we could make, with 64

full RGB color pixels in a square that is only 1" by 1"

square (25.4mm x 25.4mm). Best of all, these are little

DotStar LEDs, with built in PWM drivers, so you only

need two digital I/O pins to get a-glowin'.

Adafruit DotStar FeatherWing (https://adafru.it/AkQ)

Stacks atop any of our Feather microcontroller boards.

Arranged in a 6x12 matrix, each 2mm by 2mm sized

RGB pixel is individually addressable. Only two pins are

required to control all the LEDs.

Finer Details About DotStar Matrices

As mentioned on the DotStar Strips page, keep power consumption in mind when working with DotStar matrices. With

so many pixels at your disposal, it’s easy to get carried away.