Datasheet

Assembly

Assembly is really easy, you can use straight or 'right-angle' style headers to attach to the PCB. We'll be using the plain

straight headers included

The board comes with all surface-mount components pre-soldered. The included header strip can be soldered on for

convenient use on a breadboard or with 0.1" connectors. You can also skip this step and solder on wires.

Prepare the header strip:

Cut the strip to length if necessary. It will be easier to

solder if you insert it into a breadboard - long pins down

Add the breakout board:

Place the breakout board over the pins so that the short

pins poke through the breakout pads

Make sure the side with the components is face down, as shown in the photos in this guide!