Datasheet

Arduino BSP Setup

You can install the Adafruit Bluefruit nRF52 BSP in two steps:

1. BSP Installation

Recommended: Installing the BSP via the Board Manager

Download and install the Arduino IDE (https://adafru.it/fvm) (At least v1.6.12)

Start the Arduino IDE

Go into Preferences

Add https://www.adafruit.com/package_adafruit_index.json as an 'Additional Board Manager URL' (see image below)

Restart the Arduino IDE

Open the Boards Manager option from the Tools -> Board menu and install 'Adafruit nRF52 by Adafruit' (see

image below)

nRF52 support requires at least Arduino IDE version 1.6.12! Please make sure you have an up to date version

before proceeding with this guide!

Please consult the FAQ section at the bottom of this page if you run into any problems installing or using this

BSP!