User Manual

Here's an example program that will move a single motor in different speeds and directions

Setting Motor Speed

You can set the speed of the motor from 0% to 100% with this block. You can select which motor to use, 1 or 2. Once

you set the speed of the motor it will continue at that speed until you change it or ask it to stop.

You can change direction by having a negative percentage speed!

You may want to have two motors move at the same time so they act like wheels on a car. In that case, you can use

this handy block that will control two motors at once!

You can set the two speeds at once. If both move at the same positive speed, the tank/car will move forward. Same

negative speed it will move backward. If one side moves faster than the other, the car will turn.

If you want to 'invert' the motor, it will flip which direction positive/negative numbers go. That is, if positive was forward,

now positive will mean backwards

https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 65 of 201