User Manual

Once you have the Circuit Playground Express lined up

correctly, use the remaining screws to attach the boards

together. Start with one screw into one standoff, say

GND, leave it loose a bit, then put in the VOUT screw,

loose, then the others loosely. Ensure things are lined

up, then carefully tighten each screw. Again, a firm

connection but not overly tight.

Watch out, the CircuitPlayground Express (CPX) can go on 'backwards' and it won't work. Make sure the USB

connector on the CPX is right below the DC jack, and the labels on the silkscreen of the Crickit match the

ones on the CPX! See the images below!



https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 32 of 201