User Manual

Arduino Signals

The 8 GPIO pins on the Crickit are in the Signals block

of pins. You have the 8 data pins, each input/output,

3.3v logic, analog or digital.

These GPIO are controlled by the Crickit's seesaw chip,

not directly by the microcontroller or the Raspberry Pi.

Thus programming them takes a bit more work but they

provide some great benefits.

Signals on the Crickit are available on the following pins:

https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 182 of 201