Datasheet

As if that weren't enough, we've also added SparkFun qwiic (https://adafru.it/Fpw) compatible STEMMA

QT (https://adafru.it/Ft4) connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite

micro with a plug-and-play cable to get 6-DoF data ASAP. For a no-solder experience, just wire up to your favorite

micro, like the STM32F405 Feather (https://adafru.it/Iqc) using a STEMMA QT adapter cable. (https://adafru.it/JnB) The

Stemma QT connectors also mean the VL6180 can be used with our various associated

accessories. (https://adafru.it/Ft6)

This is the 'little sister' of the VL53L0X ToF sensor, and can handle about 5mm to 200mm of range distance. It also

includes a lux sensor. If you need a larger range, check out the VL53L0X which can measure 50 - 1200 mm.

https://learn.adafruit.com/adafruit-vl6180x-time-of-flight-micro-lidar-

distance-sensor-breakout

Page 4 of 27