Datasheet

UriBeacon

The UriBeacon example shows you how to use the built-in UriBeacon AT commands to configure the Bluefruit LE

module as a UriBeacon advertiser, following Google's Physical Web UriBeacon (https://adafru.it/edk) specification.

Opening the Sketch

To open the ATCommand sketch, click on the File > Examples > Adafruit_BluefruitLE_nRF51 folder in the Arduino IDE

and select uribeacon:

This will open up a new instance of the example in the IDE, as shown below. You can edit the URL that the beacon will

point to, from the default http://www.adafruit.com or just upload as is to test