Datasheet

Minimum connection interval (in milliseconds)

Maximum connection interval (in milliseconds)

Advertising interval (in milliseconds)

Advertising timeout (in milliseconds)

# Read the current GAP intervals

AT+GAPINTERVALS

20,100,100,30

# Update all values

AT+GAPINTERVALS=20,200,200,30

# Update only the advertising interval

AT+GAPINTERVALS=,,150,

AT+GAPSTARTADV

Causes the Bluefruit LE module to start transmitting advertising packets if this isn't already the case (assuming we

aren't already connected to an external device).

Codebase Revision: 0.3.0

Parameters: None

Output: None

# Command results when advertising data is not being sent

AT+GAPSTARTADV

# Command results when we are already advertising

AT+GAPSTARTADV

ERROR

# Command results when we are connected to another device

AT+GAPSTARTADV

ERROR

AT+GAPSTOPADV

Stops advertising packets from being transmitted by the Bluefruit LE module.

Codebase Revision: 0.3.0

Parameters: None

Updating the GAP intervals will persist the new values to non-volatile memory, and the updated values will be

used when the device is reset. To reset the device to factory settings and clean the config data from memory

run the AT+FACTORYRESET command.

