Datasheet

Then run any standard Ethernet cable to the other end where you will use a 2.1mm to microUSB adapter

cable (http://adafru.it/2727)

And plug that directly into the Feather. For long power runs there might be a slight voltage droop but since the

regulator on board will reduce the input voltage to 3.3V for the chip and peripherals (all Feathers are 3.3V logic) it

should not be noticable

5V 2A (2000mA) switching power supply - UL Listed

$7.95

IN STOCK

ADD TO CART

MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter

$1.95

IN STOCK

ADD TO CART