Datasheet

Power over Ethernet

To keep the FeatherWing small, simple and inexpensive, we do not include PoE support. However, it's a common

request that some people want to simplify cabling when the device is far away.

This all-in-one solution will let you plug an Ethernet cable to a PoE switch/hub then split into data and a Feather-

friendly micro USB connector on the other

Passive PoE

If you don't even have a PoE hub, here's a solution that doesn't even require a PoE hub: passive PoE

injectors! (http://adafru.it/435)

These cables don't have any active PoE negotation circuitry, intstead, we just use the extra unused wires in the Cat-5+

wires to carry power and ground. They're a simple and afforable solution.

On one end, plug in the Ethernet cable to your router, and a 5V wall adapter into the 2.1mm jack (http://adafru.it/276)

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4

Amp

$10.95

IN STOCK

ADD TO CART

Passive PoE Injector Cable Set

$5.95

IN STOCK

ADD TO CART