Datasheet

With inductive loads, about half that. Check the datasheet for the relay for the exact switching capacity, as it depends

on type of load and voltage type and magnitude. This relay is good for handling fairly large devices, computers, TVs,

small appliances and more.

However, note that when closing the relay, it will draw 100mA continuously from the 3.3V power rail

Each FeatherWing comes with a fully assembled and tested PCB, header you can use to attach to your Feather. By

soldering closed the jumper on the underside of the Wing you can select which pin you want to use for the relay

control. Some light soldering is required.