Datasheet

Overview

This is the Adafruit Feather M0 RFM69 Packet Radio (433 or 900 MHz) - our take on an microcontroller with a 433 or

868/915 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4

and similar, are more flexible than Bluetooth LE and without the high power requirements of WiFi. We have other

boards in the Feather family, check'em out here (https://adafru.it/l7B)

At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the

same one used in the new Arduino Zero (http://adafru.it/2843). This chip has a whopping 256K of FLASH (8x more

than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial

program & debug capability built in with no need for an FTDI-like chip.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and

built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you

do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch

over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and

monitor the battery voltage to detect when you need a recharge.