User Manual

Plug your Circuit Playground Express into your computer

using a known-good USB cable

A lot of people end up using charge-only USB cables

and it is very frustrating! So make sure you have a USB

cable you know is good for data sync

Double-click the small Reset button in the middle of the

CPX, you will see all of the LEDs turn green. If they turn

all red, check the USB cable, try another USB port, etc.

(If double-clicking doesn't do it, try a single-click!)

https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 87 of 201