User Manual

For the code below, it assumes a connected 30 NeoPixel strip (https://adafru.it/BPD) to the Crickit NeoPixel terminal

block.

When the program starts, the on start code up the variable named strip to refer to a NeoPixel strip connected to A1

(which all Circuit Playground Express Crickit strips are connected to) with 30 NeoPixels on it (You have to click the +

on the block to specify the pin A1 and add the number of NeoPixels.

https://adafru.it/CyH

https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 84 of 201