User Manual

You can use the three special NeoPixel blocks in the CRICKIT block group extension to change the single NeoPixel on-

board Crickit. They work just like the NeoPixel blocks under the LIGHT block group but just for the one Crickit pixel.

Crickit for Circuit Playground Express and Feather (micro:bit is below)

Within MakeCode for Circuit Playground Express, in the LIGHT block group, there is a special subgroup that pops

below LIGHT when LIGHT is pushed called ... NEOPIXEL. This provides a huge number of blocks to work with

NeoPixels that are not on your Crickit or the microcontroller on Crickit like a Circuit Playground Express.

When you use the MakeCode NeoPixel blocks to manipulate your Crickit connected NeoPixels, you need to use the

NEOPIXEL subgroup block labeled set strip to create strip.

https://learn.adafruit.com/adafruit-crickit-creative-robotic-interactive-

construction-kit

Page 83 of 201