Datasheet

Once uploaded you should see the following on the serial console

Before uploading, check for the #define FREQUENCY RF69_915MHZ line and comment that out (and

uncomment the line above) to match the frequency of the hardware you're using



These examples are optimized for the Feather 32u4/M0. If you're using differnet wiring,

uncomment/comment/edit the sections defining the pins depending on which chipset and wiring you are

using! The pins used will vary depending on your setup!



https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-

module

Page 56 of 78