Datasheet

Simple wire antenna or spot for uFL connector

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also

toss in some header so you can solder it in and plug into a solderless breadboard. You will need to cut and solder on

a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Lipoly battery and USB cable

not included but we do have lots of options in the shop if you'd like!

https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-

module

Page 7 of 78