Datasheet

That's pretty much it, you're done!

uFL Antenna

If you want an external antenna, you need to do a tiny bit more work but its not too difficult.

You'll need to get an SMT uFL connector, these are fairly standard (http://adafru.it/1661)

You'll also need a uFL to SMA adapter (http://adafru.it/851) (or whatever adapter you need for the antenna you'll be

using, SMA is the most common

Of course, you will also need an antenna of some sort, that matches your radio frequency

uFL connectors are rated for 30 connection cycles, but be careful when connecting/disconnecting to not

rip the pads off the PCB. Once a uFL/SMA adapter is connected, use strain relief!



https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-

module

Page 23 of 78