Datasheet

print('Received nothing! Listening again...')

else:

# Received a packet!

# Print out the raw bytes of the packet:

print('Received (raw bytes): {0}'.format(packet))

# And decode to ASCII text and print it too. Note that you always

# receive raw bytes and need to convert to a text format like ASCII

# if you intend to do string processing on your data. Make sure the

# sending side is sending ASCII data before you try to decode!

packet_text = str(packet, 'ascii')

print('Received (ASCII): {0}'.format(packet_text))

# Also read the RSSI (signal strength) of the last received message and

# print it.

rssi = rfm9x.rssi

print('Received signal strength: {0} dB'.format(rssi))

https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-

breakouts

Page 56 of 70