Datasheet

Board 3V to radio VIN

Board GND to radio GND

Board SCK to radio SCK

Board MOSI to radio MOSI

Board MISO to radio MISO

Board D5 to radio CS (or any other digital I/O pin)

Board D6 to radio RST (or any other digital I/O pin)

Usage with All-In-One Feather M0

Alternatively you can use the Feather M0 RFM9x board but be sure you've loaded the adafruit-circuitpython-

feather_m0_rfm9x-*.bin (https://adafru.it/tBa) version of CircuitPython on your board! This is very important as the

RFM9x build has special pins added to the board module which are used to access the radio's control lines!

For details on how to load a binary circuitpython build, check out our Non-UF2-Install guide (https://adafru.it/Bed)

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz

$34.95

IN STOCK

ADD TO CART

https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-

breakouts

Page 50 of 70