Datasheet

while True:

packet = rfm69.receive()

# Optionally change the receive timeout from its default of 0.5 seconds:

#packet = rfm69.receive(timeout=5.0)

# If no packet was received during the timeout then None is returned.

if packet is None:

print('Received nothing! Listening again...')

else:

# Received a packet!

# Print out the raw bytes of the packet:

print('Received (raw bytes): {0}'.format(packet))

# And decode to ASCII text and print it too. Note that you always

# receive raw bytes and need to convert to a text format like ASCII

# if you intend to do string processing on your data. Make sure the

# sending side is sending ASCII data before you try to decode!

packet_text = str(packet, 'ascii')

print('Received (ASCII): {0}'.format(packet_text))

https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-

breakouts

Page 47 of 70