User Manual

PWM Outputs

Pins that can be used as PWM outputs are marked with a tilde character ('~') on the silk screen.

The timers associated with specific PWM outputs are listed below. These timers are important since all PWM outputs

on the same HW timer will use the same period or pulse width. This means that if you set the pulse width for PA1, which

uses HW Timer 5, this will also set the pulse width for PA2 and PA3 which use the same timer peripheral block.

Pin Name

PA1

PA2

PA3

PA15

PB4

PB5

PC7

HW Timer

Timer 5

Timer 2

Timer 3

Timer 8

Notes

Status LED