User Manual

184
184
184
186
186
186
186
188
188
188
188
190
190
190
190
191
193
193
193
193
194
194
194
195
196
196
196
196
196
197
198
199
199
201
201
201
201
Setup
Compile and Flash
Testing the Sketch
HttpGetCallback
Setup
Compile and Flash
Testing the Sketch
HTTPSLargeData
Setup
Compile and Flash
Testing the Sketch
Throughput
Setup
Running Netcat
Compile and Flash
Testing the Sketch
FeatherOLED
Setup
Setting the Access Point
Enabling LIPO Battery Monitoring (Optional)
Enabling the TSL2561 Luminosity Sensor (Optional)
Enabling MQTT to Adafruit IO (Optional)
Compile and Flash
Testing the Sketch
FAQs
I bricked my board. Can I force the device into DFU mode?
What TLS Version does the WICED Feather support?
When I try to build I'm getting: Cannot run program "{runtime.tools.arm-none-eabi-gcc.path}\bin\arm-none-eabi-
g++" (in directory "."): CreateProcess error=2, The system cannot find the file specified
When I try to flash using USB DFU I get the following error from feather_dfu.py: Traceback (most recent call
last): File "...\hardware\Adafruit_WICED_Arduino/tools/feather_dfu.py", line 1, in import usb.backend.libusb1
My board isn't enumerating as a USB device, or is stuck in DFU mode. How can I re-flash the FeatherLib
firmware directly using dfu-util and restore my device?
How can I reflash the bootloader with a JLink or STLink/V2 from the Arduino IDE?
How can I flash the bootloader using AdaLink directly?
I get 'OSError: [Errno 2] No such file or directory OSError: [Errno 2] No such file or directory' when trying to use
feather_dfu.py in the Arduino IDE. What should I do?
Downloads
Related Documents
Schematic
Fabrication Print
© Adafruit Industries https://learn.adafruit.com/introducing-the-adafruit-wiced-feather-wifi Page 10 of 202