Datasheet

If you're interested in making one of the PiTFT buttons mute the audio, Martin O'Hanlon made a function.

https://adafru.it/kUb

Better Sound quality

A suggestion from the forums (https://adafru.it/ikE)!

1)Wrap the battery in copper tape and then electrical tape. Then you solder a wire from the ground of the audio

circuit to the copper. It helps to solder to a random piece and then stick it to the battery so you're not soldering on

the battery itself as it's dangerous.

2)Buy tiny ferrite beads and put them around the speaker wires. Ferrite beads provide EMI shielding and putting

them around the speaker wires worked like a charm.

Issues, Problems, Need Help?

If you encounter any technical problems with the Raspberry Pi software, components or otherwise, please post up your

issue, including photos of your wiring on the Adafruit Forums. Our support team will be able to assist you there.

https://adafru.it/kZb