Datasheet

Close It Up!

Join Parts

Now its time to close it all up. Before that, make sure all

of the wires are inside the case. Wires should be neaty

tucked and away of kinking from any of the

components. Bring the top and bottom parts together

and press the bottom part together. They should snap

together. Then, inspect the edges and see if everything

is in place - no wires hanging out. If it looks good, start

pressing the top area close together - Slowly. If you can't

squeeze the top together, the battery could be in the

way - be sure to check that and ensure its not in the way

of any of the components.