Datasheet

Install Switch

Now if a good time to insert the slide switch into the bottom case. Take note of the OFF position of the slide and install

it to your liking (I prefer down is OFF, up is ON).

Install Raspberry Pi 2

Next up, lets mount the Pi to the bottom case. First, let's

fasten #4-40 3/8 sized machine screws to the two

mount holes on the back of the bottom case part. Like

the previous mounting standoffs, fasten the screws so

they're just barely protuding through the top of the

standoffs. Then, lay the Pi over the standoffs and line up

the screws with the mounting holes. Once in place,

fasten the screws all the way until they're flush with the

surface of the case.