Datasheet

Mount Components

Install 2.8" PiTFT

The first component we need mount to the case is the

display screen. Before we do that, we'll need to insert

the PiTFT rubber buttons into the case. Place them over

the cutouts from the inside of the top case and press

them into place.

Now that the PiTFT button actuators are in place, lay the

PiTFT screen over the case. Line up the mounting holes

with the standoffs. Then, insert #4-40 3/8 sized machine

screws into each mounting hole and fasten them into

place. Be careful not to apply excess force, and fasten

slowly.