Datasheet

Parts

Download the parts and print them out accordingly - referencing the table below for material suggestions. If you don't

have access to a 3D printer, use a service like 3DHubs.com (https://adafru.it/efH) to send them to you.

https://adafru.it/kTF

https://adafru.it/kUa

Dimensions

Top Part – 141mm x 91mm x 18mm (5.55in x 3.85in x 0.71in)

Bottom Part – 141mm x 91mm 16mm (5.55in x 3.85in x 0.63in)

Tap Screw Holes

After the parts are finished printing, you'll need to tap

the standoffs with screw holes to create the threads for

mounting the components. Use a #4-40 and #2-56

sized tap or use machine screws.

pigrrl2-top.stl Top part of case PLA/ABS

pigrrl2-bot.stl Bottom of case PLA/ABS

pitft-buttons.stl Buttons for PiTFT display Ninjaflex/TPE

dpad.stl D-Pad for gamepad Ninjaflex/TPE

action-btns.stl A,B,X and Y buttons for gamepad Ninjaflex/TPE

pause-start.stl Pause and Start buttons for gamepad Ninjaflex/TPE

shoulder-btns.stl Buttons for L and R shoulder buttons Ninjaflex/TPE

shoulder-mount.stl Mounting plate for L and R shoulder buttons. PLA/ABS