Datasheet

Installing FTDI Drivers

Step #1 is to plug in your FTDI adapter and install the driver (in case it isnt on there

already). If you have an FTDI cable proper, there is already a USB A connector on the end.

If you have an FTDI adapter, you'll need a standard mini-B cable, pretty much everything

uses these so steal your camera's or cell phone's data cable.

If you are using Windows or Mac OS, you may need to need to download the FTDI

driver (http://adafru.it/aJv) if you haven't already installed it for another project. If you are

using Linux, the driver is already built in to the operating system (handy!)

Next up, plug it into your computer! If you are using Windows you may hear a sound from

the computer and a little popup bubble in the bottom right corner of the screen that says

Found New Hardware FT232R USB UART.