Datasheet

AT+EDDYSTONEURL
Update the URL for the beacon and switch to beacon mode
AT+EDDYSTONEENABLE
Enable/disable beacon mode using the configured url
AT+EDDYSTONECONFIGEN
Enable advertising for the the Eddystone configuration service for the specified number of seconds
AT+HWMODELED
Allows the user to override the default MODE LED behaviour with one of the following options: DISABLE, MODE, HWUART, BLEUART, SPI,
MANUAL
AT+BLECONTROLKEY
Allows HID media control values to be sent to a bonded central device (volume, screen brightness, etc.)
AT+BLEHIDEN
Enables or disables BLE HID support in the Bluefruit LE firmware (mouse, keyboard and media control)
AT+BLEMOUSEMOVE
To move the HID mouse
AT+BLEMOUSEBUTTON
To set the state of the HID mouse buttons
The following commands were changed in the 0.6.6 release:
AT+BLEKEYBOARDEN - Now an alias for AT+BLEHIDEN
AT+GATTADDCHAR - Added a new UUID128 field to allow custom UUIDs
Key bug fixes in this release:
Fixed issues with long beacon URLs
Fixed big endian issue in at+blebeacon for major & minor number
Known issues with this release:
Windows 10 seems to support a limited number of characteristics for the DIS service. We had to disable the Serial Number characteristic to
enable HID support with windows 10.
Version 0.6.5
The following AT commands were added in the 0.6.5 release:
AT+BLEGETPEERADDR (http://adafru.it/iCq)
The following commands were changed in the 0.6.5 release:
Increased the UART buffer size (on the nRF51) from 128 to 256 bytes
+++ now responds with the current operating mode
Fixed a bug with AT+GATTCHAR values sometimes not being saved to NVM
Fixed a bug with AT+GATTCHAR max_len value not being taken into account after a reset (min_len was always used when repopulating the
value)
Version 0.6.2
This is the first release targetting 32KB SRAM parts (QFAC). 16KB SRAM parts can't be used with this firmware due to memory management
issues, and should use the earlier 0.5.0 firmware.
The following AT commands were changed in the 0.6.2 release:
AT+BLEUARTTX (http://adafru.it/iCr)
Basic escape codes were added for new lines, tabs and backspace
AT+BLEKEYBOARD (http://adafru.it/iCr)
Also works with OS X now, and may function with other operating systems that support BLE HID keyboards
Version 0.5.0
The following AT commands were added in the 0.5.0 release:
AT+BLEKEYBOARDEN (http://adafru.it/iCr)
AT+BLEKEYBOARD (http://adafru.it/iCr)
AT+BLEKEYBOARDCODE (http://adafru.it/iCr)
© Adafruit Industries
https://learn.adafruit.com/introducing-the-adafruit-bluefruit-le-uart-
friend
Page 98 of 115