Datasheet

Gets the 48-bit BLE device address.
Codebase Revision: 0.3.0
Parameters: None
Output: The 48-bit BLE device address in the following format: 'AA:BB:CC:DD:EE:FF'
AT+BLEGETADDR
E4:C6:C7:31:95:11
OK
AT+BLEGETPEERADDR
Gets the 48-bit address of the peer (central) device we are connected to.
Codebase Revision: 0.6.5
Parameters: None
Output: The 48-bit address of the connected central device in hex format. The command will return ERROR if we are not connected to a central
device.
Please note that the address returned by the central device is almost always a random value that will change over time, and this value should
generally not be trusted. This command is provided for certain edge cases, but is not useful in most day to day scenarios.
AT+BLEGETPEERADDR
48:B2:26:E6:C1:1D
OK
AT+BLEGETRSSI
Gets the RSSI value (Received Signal Strength Indicator), which can be used to estimate the reliability of data transmission between two devices
(the lower the number the better).
Codebase Revision: 0.3.0
Parameters: None
Output: The RSSI level (in dBm) if we are connected to a device, otherwise '0'
# Connected to an external device
AT+BLEGETRSSI
-46
OK
# Not connected to an external device
AT+BLEGETRSSI
0
OK
© Adafruit Industries
https://learn.adafruit.com/introducing-the-adafruit-bluefruit-le-uart-
friend
Page 75 of 115