Datasheet

Table Of Contents

That said, if you dont need a bunch of GPIO, its very easy to add a high quality display. Pick and choose whether you

want a touch-screen or not, then choose the size of the display - 5" or 7" is best. You can also grab an FPC extension

board and extend the display away from the Pi. For power-users, this is a very nice little accessory

Comes as one fully assembled and tested DPI Kippah circuit board. You may need a soldering iron to adjust the

backlight by soldering closed a PCB jumper (check the tutorial on this). TFT display (https://adafru.it/Cfx), USB micro-B

cable (http://adafru.it/592), FPC extension cable (https://adafru.it/eVZ), bent wire stand (https://adafru.it/d7M), and

Raspberry Pi not included (but we do carry them in the shop!)