Datasheet

Pinouts

This motor driver is a fairly simple breakout of the TB6612 motor chip, so do check out the

datasheet for the TB6612 for any details you need about pin voltage limits, capacitance,

etc! (http://adafru.it/emK)

Power Pins

Vmotor - This is the voltage for the motors, not for the logic level. Keep this voltage

between 4.5V and 13.5V. This power supply will get noisy so if you have a system

with analog readings or RF other noise-sensitive parts, you may need to keep the

power supplies seperate (or filtered!)

Vcc - this is the voltage for the logic levels. Set to the voltage logic you'll be using on

https://learn.adafruit.com/adafruit-tb6612-h-bridge-dc-stepper-motor-

driver-breakout

Page 7 of 16