Datasheet

Assembly

Solder on Headers and Terminal Block

Before we can motorin' there's a little soldering to be done. This step will attach the 2x20

socket header so that we can plug this HAT into a Raspberry Pi, and the terminal blocks so

you can attach external power and motors.

Start by plugging the 2x20 header

into a Raspberry Pi, this will keep

the header stable while you

solder. Make sure the Pi is

powered down!

Place the HAT on top so that the

short pins of the 2x20 header line

up with the pads on the HAT

https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-

raspberry-pi

Page 9 of 38