Datasheet

Check over your work so far,

make sure each solder point is

shiny, and isn't bridged or dull or

cracked

Now grab the 3.5mm-spaced

terminal blocks. These will let you

quickly connect up your motor

and power supply using only a

screw driver

You will have 3 x 2-pin terminal

blocks and 2 x 3-pin terminal

blocks

Slide each of the 3-pin terminal

blocks into a 2-pin to create two

5-pin blocks

https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-

raspberry-pi

Page 13 of 38