Datasheet

And Solder!

Heat up your iron and solder in

one header connection on the

right.

Once it is soldered, put down the

solder and reheat the solder point

with your iron while straightening

the HAT so it isn't leaning down

(For tips on soldering, be sure to

check out our Guide to Excellent

Soldering (http://adafru.it/aTk)).

Solder one point on the opposite

side of the connector

https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-

raspberry-pi

Page 10 of 38